Quick Answer: How Deep Should A 10 Foot Fence Post Be?

How many feet apart should fence posts be?

eight feetTypically, fence posts are spaced between six and eight feet apart.

The corner posts are set first.

To align all of the posts in between, stretch a line from each corner post to work as your guide..

How many posts will a bag of Postcrete do?

You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.

How long do pressure treated fence posts last?

How long do pressure treated fence posts last? A properly pressure treated pine fence posts, for example, can exist for a range of 20–35 years if well installed while the untreated one only lasts between 3–7 years.

How long will a treated 4×4 post last in the ground?

The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.

How deep should a 6×6 post be in the ground?

The depth of your hole should be about 1/4 of the height of your post. For a 6×6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches.

How deep should I bury a 10 foot post?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

Should I use 4×4 or 6×6 fence posts?

6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.

How deep should post be for 8 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.

How much concrete do I need for a 4×4 fence post?

Also 1-1/2 bags per hole is about right for a 4×4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6′ above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How many bags of concrete do I need for a fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

Can I build an 8 foot fence?

One exception to this rule is that ornamental fences (open fences that do not visually disrupt view corridors) can typically be built higher than 6 feet. … The city will also allow an 8-foot fence to be built if it is located on or within the building set back lines (usually 5 or 10 feet from the property line).

How big of a hole do I need for a 4×4 post?

about 12 inches wideDig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Can fence posts be 12 feet apart?

You should space your posts 8-12 feet apart as a general rule, although 10-12 feet apart is sufficient for 5-6 wire barbed fence.

How far off the ground should a fence be?

two inchesIn most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.

Is 1 ft deep enough for fence post?

You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

What size posts do I need for a 6ft fence?

If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.